"UP DATE CHEAT PB TGL 12 JULI 2016"
OK THIS TIME I WANT TO SHARE UPDATE CHEAT 12 JULI 2016
ONLY LIVE : here
-
Monday 11 July 2016
""Tim Duncan""
Tim Duncan (born in Christiansted, St. Croix, United States Virgin Islands, 25 April 1976; age 40) is a NBA player who played for the San Antonio Spurs as a power forward and is a captain of the Spurs.
Career :
Duncan was first played in the NBA in 1997-1998 and costumes jersey number 21. In 1998 he won the best newcomer players (Rookie Of The Year). He and his friend David Robinson called the twin towers and the Spurs won the NBA title in 1999, other than that he's one part of the trio handalan spurs today reinforced Manu Ginobili, Tony Parker and brought back the Spurs won the NBA title in 2003, 2005 and 2007 on December 26, 2001 against Dallas when he chalked scoring high by scoring 53 points.
Wikimedia Commons has media related to Tim Duncan
Sunday 10 July 2016
Saturday 2 July 2016
IP SCANNING USING THE TORCH MIKROTIK
"IP SCANNING USING THE TORCH MIKROTIK"
This time I want to share the experience I have ever experienced. No nih 5210 TP-LINK radio that I am setting brigde, because sangking PageY I forgot tp link ip tersebut.jadi let aj simple clay in the video below:
MAY BE USEFUL
Friday 1 July 2016
LOAD BALANCING IN OpenWRT
"LOAD BALANCING IN OpenWRT"
we just need a router tl-wr740v4 / 5 with openwrt firmware installed, be AA, BB, CC, or even in the form of trunk (no LUCI). how / stepnya.
1. Download the firmware http://www.mediafire.com/…/Openwrt-firmware-wr740nv4-4wan-l…
2. palace uploaded to the router via WinSCP into the folder / tmp
3. rename the firmware that was already in the router with the name lb.bin or up with any name
4. open the putty login to 192.168.1.1, user and pass appropriate when first installed openwrt
5. execution fw who are in the / tmp folder with: mtd -r wite /tmp/lb.bin firmware, wait a moment until reboot.
6. move the lan cable to the blue port (port wan). then login to 192.168.1.1, user: admin pass: admin
7. The router is ready for use as loadbalancer :)
8. all 1-4 wan port, located in the port, once in 1-4 lan port, the port is now a wan initially lan ports, and all ports in the form wan protocol dhcp client (if you want to change can be changed to static, ppp, ppp, etc. )
9. to ppp there is a little bug, can not simultaneously be just one that ppp rest can be static or dhcp (or combination of protocols inteface, for dhcp and static for the fourth did not find any problems)
10. each interface are not allowed in the same subnet and gateway must have a different metric.
Btw good luck and good luck
1. Download the firmware http://www.mediafire.com/…/Openwrt-firmware-wr740nv4-4wan-l…
2. palace uploaded to the router via WinSCP into the folder / tmp
3. rename the firmware that was already in the router with the name lb.bin or up with any name
4. open the putty login to 192.168.1.1, user and pass appropriate when first installed openwrt
5. execution fw who are in the / tmp folder with: mtd -r wite /tmp/lb.bin firmware, wait a moment until reboot.
6. move the lan cable to the blue port (port wan). then login to 192.168.1.1, user: admin pass: admin
7. The router is ready for use as loadbalancer :)
8. all 1-4 wan port, located in the port, once in 1-4 lan port, the port is now a wan initially lan ports, and all ports in the form wan protocol dhcp client (if you want to change can be changed to static, ppp, ppp, etc. )
9. to ppp there is a little bug, can not simultaneously be just one that ppp rest can be static or dhcp (or combination of protocols inteface, for dhcp and static for the fourth did not find any problems)
10. each interface are not allowed in the same subnet and gateway must have a different metric.
Btw good luck and good luck
Subscribe to:
Posts (Atom)