"LOAD BALANCING IN OpenWRT"
we just need a router tl-wr740v4 / 5 with openwrt firmware installed, be AA, BB, CC, or even in the form of trunk (no LUCI). how / stepnya.
1. Download the firmware http://www.mediafire.com/…/Openwrt-firmware-wr740nv4-4wan-l…
2. palace uploaded to the router via WinSCP into the folder / tmp
3. rename the firmware that was already in the router with the name lb.bin or up with any name
4. open the putty login to 192.168.1.1, user and pass appropriate when first installed openwrt
5. execution fw who are in the / tmp folder with: mtd -r wite /tmp/lb.bin firmware, wait a moment until reboot.
6. move the lan cable to the blue port (port wan). then login to 192.168.1.1, user: admin pass: admin
7. The router is ready for use as loadbalancer :)
8. all 1-4 wan port, located in the port, once in 1-4 lan port, the port is now a wan initially lan ports, and all ports in the form wan protocol dhcp client (if you want to change can be changed to static, ppp, ppp, etc. )
9. to ppp there is a little bug, can not simultaneously be just one that ppp rest can be static or dhcp (or combination of protocols inteface, for dhcp and static for the fourth did not find any problems)
10. each interface are not allowed in the same subnet and gateway must have a different metric.
Btw good luck and good luck
1. Download the firmware http://www.mediafire.com/…/Openwrt-firmware-wr740nv4-4wan-l…
2. palace uploaded to the router via WinSCP into the folder / tmp
3. rename the firmware that was already in the router with the name lb.bin or up with any name
4. open the putty login to 192.168.1.1, user and pass appropriate when first installed openwrt
5. execution fw who are in the / tmp folder with: mtd -r wite /tmp/lb.bin firmware, wait a moment until reboot.
6. move the lan cable to the blue port (port wan). then login to 192.168.1.1, user: admin pass: admin
7. The router is ready for use as loadbalancer :)
8. all 1-4 wan port, located in the port, once in 1-4 lan port, the port is now a wan initially lan ports, and all ports in the form wan protocol dhcp client (if you want to change can be changed to static, ppp, ppp, etc. )
9. to ppp there is a little bug, can not simultaneously be just one that ppp rest can be static or dhcp (or combination of protocols inteface, for dhcp and static for the fourth did not find any problems)
10. each interface are not allowed in the same subnet and gateway must have a different metric.
Btw good luck and good luck
